Effective Home Improvement Methods-showers

Effective Home Improvement Methods-showers

Home improvement is affected by convenience, showers are getting increasingly popular as attachments to bath taps, known as bath shower mixers. Another trend is getting rid of the bath altogether and going for a shower enclosure. Of the many things to consider when hunting for a proper shower, the two most important elements are thermostatic control and adequate flow rate.
Thermostatic control automatically adjusts the balance of hot and cold water flowing through the showerhead as other taps in the house turn on and off.
There are many methods to getting good pressure through your showerhead. Which option you choose is partly dependent on your layout and the costs are largely dependent on the power of your pump. Pumps can be purchased for just over £100, but a pump delivering 30 liters per minute (equivalent to a good mains pressure system) will cost more than £180. Leading manufacturers include Monsoon. The most effective option is installing a mains pressure hot water system. Alternatively, you could have an electric shower or a combination boiler, though these choices aren’t as effective since they heat water instantaneously and therefore suffer from lower flow rates. A wide range of power showers is also available which increases water pressure sent from tanks in lofts. Installing an integral-pump shower valve tends to be among the cheaper options, but the result is often an unsightly box in the shower enclosure. Electric showers work entirely off the cold main and don’t need a supply of hot water. These heat, pump and make thermostatic adjustments to the water. The most ingenious, and probably the cheapest option, is the Aquadart Hydroflow which uses the pressure from the cold main to force the hot water flow rate up. Separate from power showers, the Aquadart Hydroflow is good because it doesn’t need a power supply. On the other hand, there is no thermostatic control.

Home Improvement – Shower trays

Acrylic trays can be bought for under £50 but they’re not recommended because as the trays flex, they leak. The most popular option is the ceramic stone tray which you can buy with an under tile upstand, which will eliminate the possibility of leaks.

Avoiding leaky showers

Because tiled shower cubicles have the tendency to displace water, pay close attention to the construction of shower enclosures. Don’t skimp on the linings, use waterproof plywood or waterproof wallboard rather than regular plasterboard. Use the best adhesive you can afford to fix ceramic tiles. The biggest cause of leaky showers (aside from poor trays) is the joint between the walls and the floor. With most designs, you are dependent on a bead of silicone mastic to block water. The silicone sealant will stand a much better chance of success if the joint is tight. Laminated wallboards are a more recent solution and these are far simpler to install and maintain than tiles.